Illus 104

Description oi Cables

A. THREE WIRE CABLE—Green wire; red wire; black wire.

B. THREE WIRE CABLE—Green wire; red wire; black wire.

C. THREE WIRE CABLE—Green wire; red wire; black wire.

D. LOOM (four wires)—Black wire with red tracer; red wire with yellow tracer; red wire with black tracer; black wire.

Connections

1. SWITCH TERMINAL—Cable "A" red wire from junction terminal (15); cable "B" red wire f'om relay (13) (terminal marked "BAT").

2. SWITCH TERMINAL—Cable "B" green wire from generator "switch" terminal (22).

5. SWITCH TERMINAL—Black wire from junction terminal (6).

6. JUNCTION TERMINAL—Cable "C" black wire from horn (20); black wire from oil signal light (29); black wire from generator signal light (28); black wire from switch terminal (5); cable "A" black wire from coil front terminal.

7. JUNCTION TERMINAL—Cable "B" black wire from relay (13); green wire from generator signal light (28).

9. BATTERY POSITIVE TERMINAL (left side)—Red wire from junction terminal (15).

10. BATTERY NEGATIVE TERMINAL (right side)—Black wire from ground terminal on irame.

11. OIL PRESSURE SIGNAL SWITCH—Green wire from oil signal light (29).

12. STOP LAMP SWITCH—Red wire from tail and stop lamp (14); green wire from coil front terminal.

13. RELAY—Cable "B" red wire from switch terminal (1) to relay terminal marKed "BAT"; cable "B" black wire from junction terminal (7); green wire from generator "relay" terminal (23).

14. TAIL AND STOP LAMP—Red wire from stop lamp switch

15. JUNCTION TERMINAL (in right side of motorcycle frame under saddle)—Cable "A" red wire from switch terminal (1); red wire from battery positive terminal (9).

19. HORN SWITCH—Loom "D" black wire from horn C20).

20. HORN—Loom "D" black wire from horn switch (19); cable "C" black wire from junction terminal (6).

22. GENERATOR ("SWITCH") TERMINAL—Cable "B" green wire from switch terminal (2).

23. GENERATOR ("RELAY") TERMINAL—Green wire from relay (13).

24. IGNITION-LIGHT SWITCH (top view)—switch is "OFF" when switch lock cover hinge is directly forward. Turn to first right position for ignition only. Switch is provided with lock and key to permit locking, if desired, when motorcycle is not in use. It can be locked in "OFF" and "PARK" positions only. When switch is unlocked and motorcycle is in use, key should be removed from lock.

25. IGNITION COIL—Cable "A" black wire from junction terminal (6); green wire from stop lamp switch (12); black wire (low tension wire) from circuit breaker (26).

26. IGNITION CIRCUIT BREAKER—Black wire (low tension wire) from coil rear terminal.

28. GENERATOR SIGNAL LIGHT (marked "GEN")—Black wire from junction terminal (6); green wire irom junction terminal (7).

29. OIL PRESSURE SIGNAL LIGHT (marked "OIL")—Green wire from oil pressure signal switch (11); black wire from junction terminal (6).

Wiring Diagram: Lighting System and Horn—1947 Models

Description oi Cables

A. THREE WIRE CABLE—Green wire; red wire; black wire.

C. THREE WIRE CABLE—Green wire; red wire; black wire.

D. LOOM (lour wires)—Black wire with red tracer; red wire with yellow tracer; red wire with black tracer; black wire.

Connections

1. SWITCH TERMINAL—Cable "A" red wire from junction terminal (15); cable "C" red wire irom junction terminal (30).

2. SWITCH TERMINAL—Cable "C" green wire from junction terminal (17); green wire from speedometer light (8).

3. SWITCH TERMINAL—Black wire from mudguard lamp (36).

4. SWITCH TERMINAL—Cable "A" green wire irom junction terminal (16).

6. JUNCTION TERMINAL—Cable "C" black wire from horn (20).

8. SPEEDOMETER LIGHT—Green wire from switch terminal (2).

9. BATTERY POSITIVE TERMINAL (left side)—Red wire from junction terminal (15).

10. BATTERY NEGATIVE TERMINAL (right side)—Black wire from ground terminal on frame.

14. TAIL AND STOP LAMP—Black wire from junction terminal (16).

15. JUNCTION TERMINAL (in right side of motorcycle frame under saddle)—Cable "A" red wire from switch terminal (1); red wire from battery positive terminal (9).

16. JUNCTION TERMINAL (in left side of motorcycle frame under saddle)—Cable "A" green wire from switch terminal (4);

black wire from tail and stop lamp (14).

17. JUNCTION TERMINAL (front terminal—left side, in headlamp bracket)—Cable "C" green wire from switch terminal (2); loom "D" red wire with black tracer from handlebar toggle switch (18).

18. HANDLEBAR TOGGLE SWITCH—Loom "D" black wire with red tracer from headlamp larger terminal screw; loom "D" red wire with yellow tracer from headlamp smaller terminal screw; loom "D" red wire with black tracer from junction terminal (17).

19. HORN SWITCH—Loom "D" black wire from horn (20).

20. HORN—Cable "C" black wire from junction terminal (6); loom "D" black wire from horn switch (19).

21. HEADLAMP—Loom "D" black wire with red tracer from handlebar toggle switch (18) to larger terminal screw; loom "D" red wire with yellow tracer from handlebar toggle switch (18) to smaller terminal screw. Note: Headlamp is shown in upside down position.

24. IGNITION-LIGHT SWITCH (top view)—Switch is "OFF" when switch cover hinge is directly forward. Turn left for parking lights—first right position for ignition only—second right position for ignition and running lights. Bear in mind that lighting headlamp when engine is dead also turns ignition "ON." Switch is provided with lock and key to permit locking, if desired, when motorcycle is not in use. It can be locked in "OFF" and "PARK" positions only. When switch is unlocked and motorcycle is in use, key should be removed from lock.

30. JUNCTION TERMINAL (front terminal—right side, in headlamp bracket)—Cable "C" red wire from switch terminal (1). This is a live terminal and can be used for accessory lamps independent of ignition-light switch.

36. MUDGUARD LAMP—Black wire from switch terminal (3).

Wiring Diagram: Generator-current and Voltage Regulator-battery; Speedometer Hand Lock; Police Pursuit Lamps and Radio Type Coil—1947 Models

0 0

Post a comment