Evap Cav Solenoid Valve

Connect a pressure pump to the No. 6 tube fitting that goes to carburetor.

CAUTION:

Damage to the EVAP CAV solenoid valve may result from use of high pressure air source. Use a hand oprated air pump only.

With the ignition switch OFF, pump air through the No. 6 tube fitting.

Make sure the air flow out from No. 4 fitting, and does not flow out from No. 7 fitting.

NO. 6 TUBE FITTING EVAP CAV

NO. 6 TUBE FITTING EVAP CAV

Turn the ignition switch ON, pump air through the No. 6 tube fitting.

Make sure the air flow out from No. 7 fitting, and does not flow out from No. 4 fitting.

If the air flow is not correct, check the EVAP CAV solenoid valve input voltage.

Exhaust Solenoid Valve Honda Cbr 600f4i

Was this article helpful?

0 0

Post a comment