Service Access Guide

• The following shows the locations of the parts that must be removed for the maintenance items listed beiow. Refer to the Common Service Manual for items not included in this manual. ■ Refer to section 2 [Frame/Body Panels/Exhaust System! for the parts that must be removed for service For exampleiAIR CLEANER(Contamination, clogging, replacement):Parts

Fuel tank-------The parts must be removed for service-

Reserve Tank Cap (Coolant fiHingl ■ Riylit side cover

Brake Pedal (Air in system)

Brake Reservoir

(Level check, fluid replacement) ■ Right side cover

Air Cleaner

(Contamination, clogging, replacement page 3-5) • Fuel tank

Throttle Grip (Operation, free play) Master Cylinder

(Level check, fluid replacement)

Brake Caliper (Pad wearl

Tire

(Wear, damage, pressure)

Wheei

(Damage, runout, corrosion)

Honda Cbr Petrol Reserve

Radiator Filler Cap (Coolant replacement) ■ Front cowl

Brake Hose (Leakage, deterioration, damage)

Brake Caliper (Pad wear)

Wheel (Damage, runout, Corrosion)

Brake Caliper (Pad wearl

Brake Lever (Air in system)

Headlight (Aim)

Radiator Filler Cap (Coolant replacement) ■ Front cowl

Brake Hose (Leakage, deterioration, damage)

Brake Caliper (Pad wear)

Tire

(Wear, damage, pressure)

Tire (Wear, damage, pressure)

Wheei

(Damage, runout, corrosion)

Wheel (Damage, runout, Corrosion)

Brake Hose

(Leakage, deterioration, damage)

Brake Light Switch (Operaion)

Pulse Secondary Air Injection System (California type] (Air leaks, deterioration, damage) ■ Right side fairing

Ignition Pulse Generator Rotor Covet Cap (Valve clearance page 3-5) * Right side fairing

Oil Filler Cap/tevel Gauge (Level check, replacement)

Synchronization Adjusting Screw (Carburetor synchronization page 3-9) ■ Fuel tank

Throttle Stop Screw (Idle speed) ■ Left side cover

Suspension

Steering Head Bearings (Damage

Valve Ciea ranee (page 3-5)

Synchronization Adjusting Screw (Carburetor synchronization page 3-9) ■ Fuel tank

Throttle Stop Screw (Idle speed) ■ Left side cover

Steering Head Bearings (Damage

Valve Ciea ranee (page 3-5)

Cbr 600 Idle Adjustment Screw

Suspension (Loose, wear, damage

Radiator Hose

(Leakage, deterioration, damage ' Side fairings

Side Stand (Operation)

Suspension (Loose, wear, damage

Radiator Hose

(Leakage, deterioration, damage ' Side fairings

Spark Plug (Wear, damage coloration) Maintenance Covers

Engine Oil Drain Bolt (Oil replacement) • Left side fairing

Drive Chain (Free play, lubrication, replacement) Evaporative Emission Canister (California type only) (Deformation, Hose Connection} Side fairings

Side Stand (Operation)

Was this article helpful?

0 0

Responses

  • leah
    Where is the idle adjustment screw at?
    8 years ago
  • uta
    How to adjust idle on cbr 600 1994?
    8 years ago

Post a comment