Side Stand Switch

Inspection

Remove the fuel tank (page 2-11).

Disconnect the side stand switch 3P mini connector

Check for continuity between each terminals as below There should be continuity between the o—o positions on the chart below.

Green White

Yellow/Black

Green

Side stand down

0-

-0

Side stand up

Remove the fuel tank (page 2-11).

Disconnect the side stand switch 3 P mini connector (Green) and remove the bolt and side stand switch.

Install the side stand switch aligning the pin on the switch with the hole in the side stand.

Secure the side stand switch with the bolt.

Install the removed parts in the reverse order of removal.

(1) 3P MINI CONNECTOR (GREEN)

2014 Polaris Rzr 800 Wiring Diagram

20. Troubleshooting

Engine Does Not Start or is Hard to Start 20-1

Engine Lacks Power 20-2

Poor Performance at Low And

Idle Speeds 20-3

Poor Performance at High Speeds 20-4 Poor Handling 20-4

Was this article helpful?

0 0

Post a comment