Assembly

END CLEARANCE:

END CLEARANCE:

(1) ROTOR SHAFT

(2) PUNCH MARK

(11) PUMP BODY

(10) OUTER ROTOR

(9) INNER ROTOR

(3) ALIGIN

(5) PUMP COVER

(7) SPACER

Before assembly, clean all disassembled parts thoroughly with clean engine oil. .

Install the outer and inner rotors into the pump body with the outer rotor punch mark facing the pump cover.

Insert the rotor shaft and install the drive pin by aligning the slots in the inner rotor.

Place the spacer into the inner rotor groove.

Install the dowel pin in the oil pump body. Install the oil pump cover.

Install and tighten the oil pump cover bolt. Torque: 8 N-m (0.8 kg-m, 5.8 Ib-ft)

(1) PUNCH MARK

(1) ROTOR SHAFT

(2) SPACER

(1) PUNCH MARK

(1) ROTOR SHAFT

(2) SPACER

ALIGN

<1) PUMP COVER

<1) PUMP COVER

(1) DRIVE SPROCKET

DRIVEN SPROCKET

(1) SPROCKET

Was this article helpful?

0 0
DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment