Assembly

OUTER ROTOR

INNER ROTOR

OIL PUMP SHAFT

OIL PUMP

Oil Pump Alignment Pins For Harley

dowel pins

DRIVE PIN

dowel pins

OIL PUMP

OUTER ROTOR

INNER ROTOR

OIL PUMP SHAFT

DRIVE PIN

Install the outer Install the outer rotor into the oil pump body with its punch mark facing the oil pump cover. Install the inner rotor into the outer rotor with its drive pin groove facing the oil pump cover. Install the oil pump shaft through the inner rotor and oil pump body.

rotor with its punch mark facing the oil pump cover.

Install the drive pin into the hole in the pump shaft and align the pin with the groove in the inner rotor as shown.

Install the thrust washer.

OUTER ROTOR

OIL PUMP SHAFT

INNER ROTOR

Honda F4i Oil Pump

DRIVE

OUTER ROTOR

OIL PUMP SHAFT

INNER ROTOR

DRIVE

Install the dowel pins.

Install the oil pump cover and tighten the bolt to the specified torque.

Check the oil pump operation by turning the pump shaft.

If necessary, reassemble the oil pump.

Was this article helpful?

0 0
DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment