Install the following:
- Return spring
- Stopper arm
- Socket bolt
Tighten the stopper arm socket holt to the specified torque.
RETURN SPRING STOPPER ARM
SOCKET BOLT WASHER
Align the dowel pin on tne shift drum center with the wide groove on the gearshift cam.
Install the dowel pin onto the shift drum.
Install the gearshift cam while holding the stopper arm using a screwdriver as shown.
Apply a locking agent to the gearshift cam socket bolt threads.
Install and tighten the socket bolt to the specified torque.
Install the thrust washer and gearshift spindle assembly into the crankcase while aligning the spring ends with the crankcase stopper pin.
Install the gearshift pedal link aligning its slit with the punch mark on the gearshift spindle.
Install and tighten the pinch bolt to the specified torque.
Install the clutch assembly (page 9-9).
DOWEL PIN I
JGEARSHIFT PEDAL LINK
Was this article helpful?
You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.