Info

WASHER

Apply a locking agent to the cam chain tensioner sockct bolt threads.

Install the washer, cam chain tensioner and sockct bolt.

Tighten the cam chain guide and cam chain tensioner socket bolts to the specified torque.

TORQUE:

Cam chain tensioner socket bolt:

10 N-m (1.0 kgf-m, 7 lbf-ft) Cam chain guide socket bolt: 12 N-m (1.2 kgf-m, 9 lbf-ft)

Install the ignition pulse generator rotor and right crankcase cover (page 17-7).

Install the dowel pins and a new cylinder head gasket as shown.

DOWEL PINS

DOWEL PINS

drai

GASKET

Install the cylinder head onto the cylinder block.

Apply molybdenum disulfide oil solution to the threads and seating surface of the 9-mm bolts/washers and install them.

Instoll the two 6-mm flange holts.

Tighten the 9-mm bolts in a crisscross pattern in two to three steps to the specified torque.

Tighten the 6 mm flange bolts.

CAM CHAIN TENSIONER

SOCKET BOLT

CAM CHAIN TENSIONER

CAM CHAIN TENSIONER

CAM CHAIN GUIDE

9 mm DOITS

6 mm BOLTS

9 mm DOITS

6 mm BOLTS

Install the com chain tensioner lifter onto the cylinder head with a new gasket.

Install new sealing washers and tighten the mounting bolts to the specified torque.

Remove the following:

- Thermostat housing (page 6-7}

- Camshaft (see below)

TENSIONER LIFTER

SOCKET BOLTS

TENSIONER LIFTER

SOCKET BOLTS

SEALING WASHERS

Was this article helpful?

0 0
Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment