Apply molybdenum oil solution to the shift fork grooves in the M3/4, C5 and C6 gear.

Install the dowel pins in the upper crankcase holes. Install the countershaft bearing set ring into the upper crankcase groove.

Install the mainshaft and countershaft by aligning the countershaft bearing groove with the set ring on the crankcase, and align the bearing cap holes with the dowel pins.

Align the countershaft bearing stopper pin with the groove in the crankcase.




Was this article helpful?

0 0
Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook

Post a comment