Honda Cbr 600 F4i Pgm-fi System

WATER HOSES

WATER HOSES

Install Starter 1991 Cbr 600

Coat a new O-ring with engine oil and install it into the oil cooler groove.

Install the oil cooler aligning its guide groove with the lug on the c.rankcase.

F4i Throttle Bodies Diagram

MOUNTING BOLT

OIL COOLER

Apply oil lo the oil cooler bolt threads and seating cur face.

install the lock Install the lock washer and oil cooler bolt.

washer with its concave side ("o" mark) facing the nil cooler

O" MARK

O" MARK

Bilder Ansatzrohr
WASHER

Make sure the oil Tighten the oil cooler bolt to thft specified torque.

cooler dolt collar slides inside the TORQUE: 64 N»m (6.5 kgf.m, 47 Ibf-ft)

oil cooler.

Connect the oil cooler water hoses and tighten the hose bands securely.

Install the oil filter cartridge and fill the crankcase with the recommended oil (page 3-14).

Fill the cooling system and bleed any air (page 6-4).

MOUNTING BOLT

OIL COOLER

Oil Cooler Hose Diagram Om617

WATER HOSES

MEMO

Cbr 600 Fuel System Diagram

5. FUEL SYSTEM (Programmed Fuel Injection)

SERVICE INFORMATION

TROUBLESHOOTING

SYSTEM LOCATION

SYSTEM DIAGRAM

PGM-FI (PROGRAMMED FUEL INJECTION) SYSTEM

PGM-FI SELF-DIAGNOSIS MALFUNCTION INDICATOR LAMP (MIL) FAILURE CODES

FUEL LINE INSPECTION

FUEL PUMP

FUEL CUT-OFF RELAY

FUEL TANK

AIR CLEANER HOUSING THROTTLE BODY INJECTOR

PRESSURE REGULATOR

FAST IDLE WAX UNIT 5-71

STARTER VALVE 5-73 STARTER VALVE

SYNCHRONIZATION 5-77

MAP SENSOR 5-79

IAT SENSOR 5-80

ECT SENSOR 5-80

CAM PULSE GENERATOR 5-81

TP SENSOR 5-82

BANK ANGLE SENSOR 5-83

ENGINE STOP RELAY 5-85

ECM (ENGINE CONTROL MODULE) 5-85

PAIR SOLENOID VALVE 5-86

PURGE CONTROL SOLENOID VALVE

(CALIFORNIA TYPE ONLY) 5-87

O2 SENSOR (CALIFORNIA TYPE

ONLY) 5-88

Was this article helpful?

0 0
DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment