Re careful not to Install the radiator assembly, aligning its grommet damage the mdia- with the frame boss.
BOLTS GROUND EYELET
install the washer and upper mounting bolt, then tighten the bolt.
Install the radiator lower mounting bolt/nut, tighten the nut securely.
Conncct the fan motor sub-harness 2P (Black) connector.
Connect the lower radiator huse and oil cooler water hose.
Connect the upper radiator hose.
Connect the siphon hose and air bleed hose to the radiator.
l-ill the system with the recommended coolant (page 6 5».
Install the inner half cow/lower cowl (page 2-5).
2P (BLACK) CONNECTOR
K OIL COOLER
LOWER RADIATOR HOSE
AIR BLEED HOSE
Was this article helpful?