Install the fork leg through the bottom bridge and top bridge so that the height from the top bridge upper surfocc to the fork tube end is 33 mm (1.3 in).

Tighten the fork top hridge pinch bolt to the specified torque.

Tighten the bottom bridge pinch bolts to the specified torque.




Tighten the fork bull lo the specified torque if it was removed.

Install the handlebar.

Make sure the handlebar boss is positioned in the fork top bridge groove.

Tighten the handlebar pinch bolt securely.

Right fork: Secure the handlebar switch wire with the wire band.

Left fork. Secure the handlebar switch and horn wire with the wire bands (page 1-23).

Install the front wheel (page 13-13).

Was this article helpful?

0 0
DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook

Post a comment