NOTICE i

• Always start with the adjusters fully turned in when adjusting the damping.

• Dn not turn the adjuster screws more than the given positions or the adjusters may be damaged.

The compression and rebound damping can be adjusted by turning the adjusters.

Honda Cbr 600 Del 2000

DIRECTION H: Increase the damping force DIRECTION S: Decrease the damping force

Turn the compression adjuster clockwise until it stops, then turn the adjuster counterclockwise.

COMPRESSION ADJUSTER STANDARD POSITION: 1-1/2 turns out from fully turned in

Turn the rebound adjuster clockwise until it slops, then turn the adjuster counterclockwise.

REBOUND ADJUSTER STANDARD POSITION: 1-1/2 turns out from fully turned in

FRONT

REAR

FRONT

REAR

Tire pressure kPa (kgf/cm5, psi)

250 (2.50, 36)

290 (2.90, 42)

Tire size

(73W)

Bridgestone

BT101FF

BT101RF

Tire _ , . . Dunlop brand

D207FJ

D207P

Michelin

Pilot SPORT E

Pilot SPORT F

Check the tires for cuts, embedded nails, or other damage.

Check the front and rear wheels for trucness (refer to section 13 arid 14).

Measure the tread depth at the center of the tires. Replace the tires when the tread depth reaches the following limits.

MINIMUM TREAD DEPTH: FRONT: 1.5 mm (0.06 in) REAR: 2.0 mm (0.08 in)

Was this article helpful?

0 0
DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment