Where Is The Masterlink On A Honda F4i

Never reuse the old drive chain, master link, master link plate and O-rings.

Insen the master Assemble the new master link, O-rings and plate.

link from the inside of the drive chain, and install the (jiate with the identification mark facing out.

o-rings

PLATE

o-rings

07hmh Mr10103

Assemble and install the drive chain tool set.

TOOL:

Drive chain tool set

07HMH-MR10103 or 07HMH-MR1010A (U.S.A. only)

DRIVr CHAIN TOOL SET

DRIVr CHAIN TOOL SET

07hmh Mr10103

Make sure the master link pins are installed properly. Measure the master link pin length projected from the plate.

STANDARD LENGTH: DID: 1.15 - 1.55 mm (0.045 - 0.061 in) RK: 1.2 - 1.4 mm (0.05 - 0.06 in)

Stake the master link pins.

MASTER LINK PINS

MASTER LINK PINS

Make sure the pins are staked properly by measuring the diameter of the staked area using a slide caliper.

DIAMETER OF THE STAKED AREA: DID: 5.50 - 5.80 mm (0.217 - 0.228 in) RK: 5.55 - 5.85 mm (0.219 - 0.230 in)

A drive chain with After staking, check the staked area of the master link a clip-type master fnr cracks.

link must not be jf there is any cracking, replace the master link, 0-

^ rings and plate.

DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Responses

  • PIMPERNEL
    Where is the masterlink on a honda f4i?
    5 years ago

Post a comment