Notice

While installing the piston, being careful not to damage the top surface of the cylinder, especially around the cylinder bore.

Be careful not to damage the cylinder sleeve and crankpin with the connccting rod bolt threads.

PISTON RING COMPRESSOR

PISTON RING COMPRESSOR

Make sure the ring compressor tool sirs flush wi:h the top surface of the cylinder

Use the handle of a plastic hammer to tap the piston into the cylinder.

"IN" MARK

OIL HOLE

CONNECTING ROD

"IN" MARK

OIL HOLE

Apply molybdenum oil solution lo the crankpin bearing surfaces. Install the bearing cap.

Make sure the marks on the caps are aligned with the marks on the connecting rods.

Apply oil to the connecting rod nut threads and seating surfaces.

Install the connecting rod nuts and tighten the nuts gradually and alternately, then tighten them to the specified torque.

NUTS

NUTS

MEMO

77 N-m (2.2 kgf-m, 16 lhf-tt)

Was this article helpful?

0 0
DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment