Piston Inspection

Measure the piston ring-to-ring groove clearance with the rings pushed into the grooves.

SERVICE LIMITS: Top/second: 0.08 mm (0.003 in)

Temporarily install the piston rings to their proper position with the mark facing up.

Insert the piston ring squarely into the bottom of the cylinder and measure the ring end gap.

Second: 0.5 mm (0.02 in) Oil (side rail): 1.0 mm (0.04 in)

Measure the piston pin bore. SERVICE LIMIT: 17.02 mm (0.670 in)

Measure the O.D. of the piston pin. SERVICE LIMIT: 16.98 mm (0.6G9 in) Calculate the piston-to-piston pin clearance. SERVICE LIMIT: 0.04 mm (0.002 in)

DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook

Post a comment