Removal

Drain the coolant (page 6-4).

Disconnect the lower radiator hose and bypass hose from the water pump cover.

Remove the two SH bolts, two flange bolts and water pump cover.

Remove the O-ring from the water pump body.

Disconnect the water pump-to-water joint hose and oil cooler water hose from the water pump body.

Remove the water pump body from the crankcase.

INSPECTION HOLE

WATER PUMP COVER

BOLTS

O-RING

WATER HOSE Lj

WATER PUMP BODY

OIL COOLER WATER HOSE

Pour molybdenum oil solution into the hole in the water pump as shown.

Apply molybdenum oil solution to the thrust washer.

Apply engine oil to a new O-ring and install it onto the stepped portion of the water pump.

Connect the water pump-to-water joint hose and oil cooler water hose to the water pump and tighten the clamp screws.

Install the water pump into the crankcase while aligning the water pump shaft groove with the uil pump shaft end by turning the water pump impeller.

Align the mounting boll holes in the water pump and crankcase and make sure the water pump is securely installed.

WATER PUMP COVER

WATER PUMP BODY

Body Language

Body Language

Is a handshake really just a mere handshake, or does it express so much more? Discover Body Language and How it Can Benefit You. You will never be in the dark again on a persons mood when you can read their body language!

Get My Free Ebook


Post a comment