Removal

Remove the following:

- Handlebars (page 13-3)

Release the wire band and clamp, then disconnect the ignition switch 4P (White) connector.

Remove the bolt and front brake hose clamp.

Disconnect the horn connector. Remove the bolt and horn unit.

HANDLEBAR PINCH BOLT

INCH BOLT W* STOPPER RING

WIHfc HANDS

WIRE CLAMP WIRE BAND

(WHITE) CONNECTOR

BRAKE HOSE CLAMP BOLT

HOHN UNIT BRACKE I BULI

Remove the steering stem nut cap.

STEM NUT CAP

r vs

Remove the stem nut and the top bridge. Remove the fork leys (paye 13-14).

Straighten the tabs of the lock washer.

Remove the steering bearing adjustment nut lock nut and lock washer.

LOCK NUT

LOCK NUT

LOCK WASHER TAB

LOCK WASHER TAB

Remove the steering stem hearing adjustment nut using the special tool.

TOOL:

Steering stem socket

07916-3710101

STEERING STEM SOCKET

STEERING STEM SOCKET

ADJUSTING NUT

Remove the following:

- Dust seal

- Upper bearing inner race

- Upper bearing

- Steering stem

- Lower bearing

Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment