Warning

Be prepared for fuel spillage; any spilled fuel must be completely wiped up immediately. When the fuel hose is disconnected, fuel spills out from the hose and the pipe because of residual pressure. Cover the hose connection with a piece of clean cloth to prevent fuel spillage.

• Remove the fuel tank, and place it on a flat surface. ODo not remove the pump inlet hose [A].

• For California Model, note the following:

_CAUTION_

For California model, if gasoline, solvent, water or any other liquid enters the canister, the canister's vapor absorbing capacity is greatly reduced. If the canister does become contaminated, replace it with a new one.

OBe sure to plug the evaporative fuel return hose to prevent fuel spilling before fuel tank removal.

Was this article helpful?

0 0

Post a comment