Calipers

Caliper Installation

• Install the caliper and brake hose lower end. OReplace the washers on each side of hose fitting with new ones.

Torque - Caliper Mounting Bolts (Front): 25 N-m (2.5 kgf-m, 18 ftlb)

Caliper Mounting Bolts (Rear): 25 N-m (2.5 kgf-m, 18 ft lb)

Brake Hose Banjo Bolt: 25 N-m (2.5 kgf-m, 18 ft-lb)

• Check the fluid level in the brake reservoirs.

• Bleed the brake line (see Bleeding the Brake Line).

• Check the brake for good braking power, no brake drag, and no fluid leakage.

Was this article helpful?

0 0

Post a comment