Handlebar Installation

• Install the handlebar lower clamps [A], noting the letters "L" [B] and "R" [C].

Torque - Handlebar Lower Clamp Nuts: 34 N-m (3.5 kgf-m, 25 ftlb)

Align the punch mark [A] on the handlebar and the corner edge [B] on the lower clamp.

1 Tighten the front clamp bolts first, and then the rear clamp bolts. There will be a gap [A] at the rear part of the clamp after tightening.

Torque - Handlebar Clamp Bolts: 25 N-m (2.5 kgf-m, 18 ftlb)

Was this article helpful?

0 0

Post a comment