Oil Pan Installation

• Install the oil screen so that the crankcase rib [B] fits the slot [C] of the oil screen.

• Apply engine oil to the O-rings on the oil pipe.

*If the oil pressure relief valve was removed, install it. OApply a non-permanent locking agent to the threads of the oil pressure relief valve, and tighten it.


Do not apply too much non-permanent locking agent to the threads. This may block the oil passage.

Torque-Oil Pressure Relief Valve: 15 N-m (1.5 kgf-m, 11 ftlb)

• Install the clamp [A] at an angle of within 45° [B] as shown.

• Replace the oil pan gasket with a new one.

Torque - Oil Pan Bolts [C]: 11 N m (1.1 kgf-m, 95 inlb)

Was this article helpful?

0 0

Post a comment