Periodic Maintenance Procedures

• Tighten both chain adjuster locknuts securely.

Torque - Rear Axle Nut: 127 N m (13 kgf m, 94 ft lb)

• Turn the wheel, measure the chain slack again at the tightest position, and readjust if necessary.


OWhen inserting the cotter pin, if the slots in the nut do not align with the cotter pin hole in the axle, tighten the nut clockwise [B] up to next alignment.

OIt should be within 30 degree.

OLoosen once and tighten again when the slot goes past the nearest hole.

Was this article helpful?

0 0

Post a comment