Specifications

Item

Standard

Battery:

Type

Sealed Battery

Capacity

12 V 8 Ah

Voltage

12.6 V or more

Charging System:

Type

Three-phase AC

Alternator output voltage

42 V or more

Stator coil resistance

0.3 ~ 0.4 Q

Charging voltage

14.7 ± 0.5 V

(regulator/rectifier output voltage)

Ignition System:

Crankshaft sensor resistance

376 ~ 564 Q

Crankshaft sensor peak voltage

1.9 V or more

Camshaft Position Sensor resistance

400 ~ 460 Q

Camshaft Position Sensor peak voltage

0.2 V or more

Stick coil:

Primary winding resistance

1.04 ~ 1.56 Q

Secondary winding resistance

10.8 ~ 16.2 kQ

Primary peak voltage

88 V or more

Spark plug:

Spark plug gap

0.7 ~ 0.8 mm (0.028 ~ 0.031 in.)

IC igniter inspection:

in the text

Electric Starter System:

Starter motor:

Brush length

12 mm (0.47 in.) (Service limit: 8.5 mm, 0.33 in.)

Commutator diameter

28 mm (1.10 in.) (Service limit: 27 mm, 1.06 in.)

Switch and Sensor:

Speedometer sensor

in the text

Rear brake light switch timing

ON after about 10 mm pedal travel

Engine oil pressure switch connections

When engine is stopped: ON

When engine is running: OFF

Fan switch connections

Rising temperature

From OFF to ON @ 93 ~ 103°C (199 ~ 217°F)

Falling temperature

Fan stops with the temperature 3~8 °C (38 ~ 46 °F)

lower than the operation temperature range.

ON: Less than 0.5 Q

OFF: More than 10 MQ

Water temperature sensor resistance

in the text

Fuel level sensor resistance:

Fuel position

4 ~ 10 Q

Empty position

90 ~100 Q

Fuel reserve switch

in the text

Was this article helpful?

0 0

Post a comment