Info

2. The bike was placed back on the bike lift and service tech Kazoo started by draining the primary fluid. To get the primary off the bike the floorboard needed to come off, then Kazoo removed the outer cover, the primary chain tensioner, the clutch plates, then the mainshaft nut and the clutch basket along with the front sprocket and chain.

7. Next, the backing plate was mounted to the bike and torqued to 25 lb-ft, you can see that the front of the backing plate has six bolts that mount to the motor (if Kazoo's hand wasn't in the way), and three that mount to the transmission.

2. The bike was placed back on the bike lift and service tech Kazoo started by draining the primary fluid. To get the primary off the bike the floorboard needed to come off, then Kazoo removed the outer cover, the primary chain tensioner, the clutch plates, then the mainshaft nut and the clutch basket along with the front sprocket and chain.

3. The starter bolts were then removed along with the inner primary mounting bolts. Then Kazoo removed the stock inner primary from the bike.

5. Before the backing plate was mounted Kazoo checked the starter shaft pinion gear for any damage. Everything was in good shape so a little grease was placed along the edge where the starter will line up with the backing plate.

8. Once the backing plate was bolted up, Kazoo aligned the starter to the plate and torqued the bolts to 20 lb-ft.

4. Here is the EVO-8S open belt drive kit starting with the newly designed backing plate, front pulley, clutch basket, 2 3/4 inch belt, starter shaft cover, and mounting hardware.

6. The next thing was the removal of the stock H-D bearing inner race from the transmission, the BDL backing plate has its own seal and bearing. The plate will not fit if you don't remove the race.

9. Next was the ball bearing lock up clutch assembly, which consists of seven fiber plates, seven steel plates, one diaphragm spring, one spring retainer, four socket head bolts, ball bearing housing, and 32 3/8-inch ball bearings.

SEPTEMBER 17 - 20 OCEAN CITY, MARYLAND

mustang MotorcycleSeats

MRC LOCATION:

0 0

Post a comment