Be careful not to permit the charging current to exceed 4 A at any time

• After recharging, wait at least 30 minutes and then measure the battery voltage using a tester.

• If the battery voltage is less than 12.5 V, recharge the battery again.

• If the battery voltage is still less than 12.5 V after recharging, replace the battery with a new one.

• When a battery is left unused for a long time, it's voltage needs to be regularly measured. When the motorcycle is not used for more than one month (especially during the winter season), measure the battery voltage at least once a month.

Was this article helpful?

0 0
DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment