Remove side frame cover (left side only). (C7= 5-6) Remove the rear shock absorber upper mounting bolt and nut
• Remove the cushion lever mounting bolt and nut ©. NOTE:
Slightly loosen the cushion lever rod mounting nuts and rear shock absorber lower mounting nut to facilitate later disassembly.
Remove the right and left pivot shaft end caps ©.
Remove the swingarm by removing the pivot shaft nut and pivot shaft.
Remove the rear shock absorber cushion lever cushion lever rods
Was this article helpful?
You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.