Remounting

Remount the front wheel in the reverse order of removal. Pay attention to the following points:

• Install the front wheel.

A WARNING

Face the arrow mark (§) on the tire to the direction of wheel rotation, when remounting the wheel.

• Tighten the front axle © to the specified torque. H Front axle: 65 N-m (6.5 kgf-m, 47.0 Ib-ft)

• Tighten the front axle pinch bolts © to the specified torque. [5 Front axle pinch bolt: 23 N-m (2.3 kgf-m, 16.5 Ib-ft)

NOTE:

Before tightening the front axle nut and front axle nut pinch bolts, move the front fork up and down four or five times.

• Tighten the brake caliper mounting bolts © to the specified torque.

[*] Brake caliper mounting bolt: 39 N-m (3.9 kgf-m, 28.0 Ib-ft)

NOTE:

After remounting the brake calipers, pump the brake lever a few times to check for proper brake operation.

FRONT FORK CONSTRUCTION

kgf-m

© Front fork protecter

@ Dust seal

© Oil seal stopper ring

© Oil seal retainer

© Outer tube slide metal

® Oil lock piece

® Cylinder

® Inner tube slide metal

Front fork cap bolt Front axle pinch bolt Cylinder bolt

Was this article helpful?

0 0
DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment