Suspension Setting

After installing the rear suspension, adjust the spring pre-load and damping force as follows.

Spring pre-load adjuster ©

Rebound damping force adjuster ©





Master cylinder reservoir cap

Reservoir cap plate


Piston/cup set

Master cylinder holder

Master cylinder

Brake hose #1

Brake hose joint

Brake pads

Brake pad mounting pin



Dust seal

Piston seal

Brake caliper pistons

Brake caliper

Brake caliper holder

Master cylinder holder bolt Brake hose union bolt Air bleeder valve Brake caliper mounting bolt


a warning

* This brake system is filled with an ethylene glycol-based DOT 4 brake fluid. Do not use or mix different types of fluid, such as silicone-based or petroleum-based brake fluids.

* Do not use any brake fluid taken from old, used or unsealed containers. Never reuse brake fluid left over from the last servicing or which has been stored for long periods of time.

* When storing brake fluid, seal the container completely and keep it away from children.

* When replenishing brake fluid, take care not to get dust into the fluid.

* When washing brake components, use new brake fluid. Never use cleaning solvent.

* A contaminated brake disc or brake pad reduces braking performance. Discard contaminated pads and clean the disc with high quality brake cleaner or a neutral detergent.


Handle brake fluid with care: the fluid reacts chemically with paint, plastics, rubber materials etc.

Was this article helpful?

0 0
DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook

Post a comment