• Install the valve springs with the smaller pitch ® facing the cylinder head.
• Install the valve spring retainer, press down the springs using the valve lifter and then install the cotter halves on to the stem end. Then, release the valve lifter to allow the cotter © to wedge between the retainer and the valve stem. Be sure that the rounded lip ® of the cotter fits snugly into the groove ® in the stem end.
Was this article helpful?
You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.