T55l1 0990009004 Impact driver set tS 9900032050 Thread Lock 1342

Camshaft Driven Oil Pump With Labelling

Align the center teeth on the gearshift shaft with the center teeth on the gearshift cam driven gear.

• Install the washer and fix the gearshift shaft with the circlip. It55l1 09900-06107: Snap ring pliers

• Install the washer (D, pin ©, oil pump driven gear @ and washer ©.

• Fix the oil pump driven gear with the circlip. froSh 09900-06107: Snap ring pliers

Yamaha Xtz750 Oil Pump

• Install the thrust washer © onto the countershaft. NOTE:

The flat surface of the thrust washer should face out.

• Install the generator/oil pump drive gears ® onto the primary driven gear assembly ® as shown.

• Install the primary driven gear assembly onto the countershaft, and apply engine oil onto the needle bearing © and spacer

• Install the primary driven gear assembly onto the countershaft, and apply engine oil onto the needle bearing © and spacer

• Install the clutch sleeve hub onto the countershaft.

• Install the washer seat washer © and clutch sleeve hub nut © as shown.

• Tighten the clutch sleeve hub nut to the specified torque. fro5h 09920-53740: Clutch sleeve hub holder H Clutch sleeve hub nut: 95 N m (9.5 kgf-m, 68.5 Ib-ft)

Suzuki Clutch Sleeve Hub Holder ToolBandit Super Clutch

• Insert the clutch drive plates and driven plates one by one into the clutch sleeve hub in the prescribed order, drive plate first.

Apply SUZUKI SUPER GREASE "A" to the clutch push rod ® when installing it.

Was this article helpful?

0 0
DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Responses

  • Daryl
    How to realign oil pump for harleys?
    8 years ago

Post a comment