Air filter

The air filter should be cleaned at the specified intervals. It should be cleaned more frequently if you are riding in unusually wet or dusty areas.

1. Remove the air filter case cover by removing the screws.

2. Remove the air filter.

3. Tap the air filter lightly to remove most of the dust and dirt. Blow out the remaining dirt with compressed air as shown. If the air filter is damaged, replace it.

1. Holder

2. Projection

3. Slot

1. Holder

2. Projection

3. Slot

4. Install the air filter on the air filter case as shown.

1. Match marks

5. Align the match marks and install the air filter case cover.

EC000082

1. Match marks

5. Align the match marks and install the air filter case cover.

EC000082

CAUTION:

Make sure the air filter is properly seated in the air filter case. The engine should never be run without the air filter installed. Excessive piston and/or cylinder wear may result.

0 0

Post a comment