Final gear oil

ik WARNING

Do not let foreign material enter the final gear case. Be sure oil does not get on the tire or wheel.

1. Oil level inspection a. Place the motorcycle on a level place and hold it in an upright position. The engine should be cool at ambient temperature.

b. Remove the oil filler bolt and check the oil level. The oil level should be at the brim of the filler hole. Add the recommended oil if necessary.

2. Oil replacement a. Place an oil pan under the final gear case.

b. Remove the oil filler bolt and drain plug to drain the oil.

c. Reinstall and tighten the drain plug to the specified torque.

Tightening torque: Drain plug: 23 Nm (2.3 rrvkg, 17fMb)

d. Fill the gear case to the brim of the filler hole with the recommended oil.

Final gear case capacity:

SAE 80 API GL-4 Hypoid gear oil If desired, an SAE 80W90 hypoid gear oil may be used for all conditions.

"GL-4" is a quality and additive rating. Hypoid gear oils rated "GL-5" or "GL-6" may also be used.

e. Reinstall and tighten the filler bolt to the specified torque.

Tightening torque: Oil filler bolt:

f. After replacing the final gear oil, be sure to check for oil leakage.

1. Case cover

1. Case cover

0 0

Post a comment