Front wheel installation

1. Install the speedometer gear unit into the wheel hub. Make sure the wheel hub and the speedometer gear unit are installed with the projections meshed into the slots.

2. Lift up the wheel between the front fork legs and guide the brake disc between the brake pads. Make sure the slot in the speedometer gear unit fits over the stopper on the front fork outer tube.

3. Install the wheel axle and tighten it to the specified torque.

Tightening torque: Wheel axle:

4. Push down hard on the handlebars several times to check for proper fork operation.

5. Install the pinch bolt and tighten it to the specified torque.

Tightening torque: Pinch bolt:

6. Install the speedometer cable.

1. Adjusting nui

2. Brake rod

3. Tension bar bolt

4. Tension bar

1. Middle drive shaft joint

2. Drive shaft

EAU00988

1. Adjusting nui

2. Brake rod

3. Tension bar bolt

4. Tension bar

0 0

Post a comment