OUT OF SPECIFICATION
The wiring circuit from the left handlebar switch to the bulb socket connector is faulty, repair it.
►Connect the pocket tester (DC 20 V) to the bulb socket connector.
| Flasher light Turn indicator light
At the flasher light (left):
Tester (+) lead ^ Chocolate lead ® Tester (-) lead ^ Frame ground
At the flasher light (right):
Tester (+) lead ^ Dark green lead Tester (-) lead ^ Frame ground
Turn the main switch to "ON".
Turn the turn switch to "L"/"R" or push the hazard switch.
Check the voltage (12 V) of the "Chocolate" lead or "Dark green" lead on the bulb socket connector.
This circuit is not faulty.
Was this article helpful?