Adjusting The Throttle Cable Free Play

NOTE:

Prior to adjusting the throttle cable free play, the engine idling speed and carburetor synchronization should be adjusted properly.

1. Check: • throttle cable free play d) Out of specification ^ Adjust.

600 Fazer Throttle CableMotorcycle Throttle Cable Yamaha Fazer
Throttle cable free play (at the flange of the throttle grip) 3 ~ 5 mm

2. Remove:

• ignition coil

3.Adjust:

• throttle cable free play

Carburetor side NOTE:

When the motorcycle is accelerating, throttle cable #1 © is pulled and throttle cable #2 <2 is pushed.

a. Loosen the locknut © on throttle cable #2.

b. Turn the adjuster ® © or © to take up any slack on throttle cable #2.

c. Loosen the locknut © on throttle cable #1.

d. Turn the adjuster © © or ® until the specified free play is obtained.

Direction (a) ^ Throttle cable free play is increased. Direction ® ^ Throttle cable free play is decreased.

e. Tighten the locknuts. NOTE:

If the specified throttle cable free play cannot be obtained on the carburetor side of the cable, use the adjusting nut on the handlebar side.

Handlebar side a. Loosen the locknut ©.

b. Turn the adjusting nut <2 in direction d> or © until the specified throttle cable free play is obtained.

Direction (a) ^ Throttle cable free play is increased.

Direction ® ^ Throttle cable free play is decreased.

c. Tighten the locknut.

+1 0

Responses

  • Justiina
    How to adjust acceleration in yamaha fazee?
    4 months ago

Post a comment