Caution

Tighten the connecting rod bolts using the plastic-region tightening angle method. Always install new bolts and nuts.

g. Clean the connecting rod bolts and nuts. (except for CAL)

Clean the connecting rod bolts. (for CAL)

h. Tighten the connecting rod nuts. (except for CAL)

Tighten the connecting rod bolt. (for CAL)

i. Put a mark ® on the corner of the connecting rod nut (2 and the connecting rod (3. (except for CAL)

Put a mark ® on the corner of the connecting rod bolt (2 and the connecting rod (3.(for CAL) j. Tighten the nut (except for CAL) or bolt (for CAL) further to reach the specified angle (150° except for CAL, 120° for CAL).

Was this article helpful?

0 0

Post a comment