Before tightening the crankcase bolts, make sure that the transmission gears shift correctly when the shift drum assembly is turned by hand.

6. Install: • crankcase bolts


• Lubricate the bolt threads with engine oil.

• Tighten the bolts in the tightening sequence cast on the crankcase.

1st: 12 Nm (1.2 m^kg, 8.7 fWb) 2nd: 25 Nm (2.5 m^kg, 18 fMb) *3rd: 27 Nm (2.7 m^kg, 20 fWb) Bolt ©, ©

* Loosen the bolts following the tightening order and then tighten to specification torque.

Was this article helpful?

0 0

Post a comment