Checking The Fuel And Breather Hoses

The following procedure applies to all of the fuel and breather hoses.

1. Remove:

• front cowling inner panel (left and right) Refer to "COWLINGS"

Refer to "FUEL TANK".

Cracks/damage ^ Replace. Loose connection ^ Connect properly.

NOTE:

• Before removing the fuel hose, place a few rags in the area under where it will be removed.

• There is a white mark on the fuel tank breather hose.

Refer to "CABLE ROUTING" in chapter 2.

3. Install:

Refer to "FUEL TANK".

• front cowling inner panel (left and right) Refer to "COWLINGS".

Was this article helpful?

0 0

Post a comment