Checking The Transmission

1. Measure: • main axle runout (with a centering device and dial gauge ®) Out of specification ^ Replace the main axle.

Main axle runout limit 0.02 mm (0.0008 in)

Main axle runout limit 0.02 mm (0.0008 in)

2. Measure: • drive axle runout (with a centering device and dial gauge ®) Out of specification ^ Replace the drive axle.

Drive axle runout limit 0.02 mm (0.0008 in)

Drive axle runout limit 0.02 mm (0.0008 in)

• transmission gears

Blue discoloration/pitting/wear ^ Replace the defective gear(s).

• transmission gear dogs Cracks/damage/rounded edges ^ Replace the defective gear(s).

Was this article helpful?

0 0

Post a comment