GASKETS, OIL SEALS AND O-RINGS
1. When overhauling the engine, replace all gaskets, seals and O-rings. All gasket surfaces, oil seal lips and O-rings must be cleaned.
2. During reassembly, properly oil all mating parts and bearings and lubricate the oil seal lips with grease.
LOCK WASHERS/PLATES AND COTTER PINS
After removal, replace all lock washers/plates d and cotter pins. After the bolt or nut has been tightened to specification, bend the lock tabs along a flat of the bolt or nut.
Was this article helpful?