Eas00583

1. Remove:

2. Remove: • brake pads ® (along with the brake pad shims)

3. Measure: • brake pad wear limit @ Out of specification ^ Replace the brake pads as a set.

Brake pad wear limit 1.0 mm (0.04 in)

4. Install:

• brake pad spring

• brake pad shims (onto the brake pads)

NOTE:

Always install new brake pads, brake pad shims, and a brake pad spring as a set.

Brake pad wear limit 1.0 mm (0.04 in)

Connect a clear plastic hose ® tightly to the bleed screw (2. Put the other end of the hose into an open container.

b. Loosen the bleed screw and push the brake caliper pistons into the brake caliper with your finger.

c. Tighten the bleed screw.

Was this article helpful?

0 0

Post a comment