Headlight Positive tester probe Negative tester probe black ® black/yellow (4)

Headlight coupler (wire harness side) [0 High beam

High beam indicator light (LEDs) Positive tester probe ^ yellow (5) Negative tester probe ^

black/white (6)

Meter assembly coupler (wire harness side)

Turn the main switch to "ON". ►Start the engine.

► Set the dimmer switch to " |0 " or" =Q". ►Measure the voltage (DC 12 V) of black/green (2 or black/yellow @ on the headlight coupler (wire harness side).

► Is the voltage within specification?

Was this article helpful?

0 0

Post a comment