Elec

6. The fuel level warning light fails to come on.

1. Fuel sender

Drain the fuel from the fuel tank and remove the fuel pump from the fuel tank. Disconnect the fuel sender coupler from the wire harness.

»Connect the pocket tester (Q x 10) to the fuel sender terminals as shown.

Tester positive probe Tester negative probe green/white ® ► black (2)

• Measure the fuel sender resistances.

Measure the resistances when the float arm is in contact with the full position and empty position of the stopper.

Fuel sender resistance Full position of the float

20 - 26 Q at 20oC (68°F) Empty position of the float 134 - 140 Q at 20°C (68°F)

Is the fuel sender OK?

Was this article helpful?

0 0

Post a comment