Info

63 Nm (6.3 m^kg, 46 fHb)

• Before installing the oil cooler, lubricate the union bolt and O-ring with a thin coat of engine oil.

• Make sure the O-ring is positioned properly.

• cooling system

(with the specified amount of the recommended coolant)

Refer to "CHANGING THE COOLANT" in chapter 3.

(with the specified amount of the recommended engine oil)

Refer to "CHANGING THE ENGINE OIL" in chapter 3.

• cooling system

Leaks ^ Repair or replace any faulty part.

6. Measure:

• radiator cap opening pressure

Below the specified pressure ^ Replace the radiator cap.

Refer to "CHECKING THE RADIATOR".

Was this article helpful?

0 0

Post a comment