Malfunction in ECU

Execute diagnostic code 60

1.Check the faulty cylinder. (If there are multiple cylinders, the number of the faulty cylinders appear alternately at 2-second intervals.)

2.Readjust the CO of the displayed cylinder. Refer to "ADJUSTING THE EXHAUST GAS VOLUME" in chapter 3.

Replace ECU if defective.

Reinstated by turning the main switch ON.

Fault code No. 46 Symptom Power supply to the FI system relay is not normal.

Used diagnostic code No. —


Inspection operation item and probable cause

Operation item and countermeasure

Reinstatement method

Was this article helpful?

0 0

Post a comment