Info

minimum of D2 D4 or D6

b. If out of specification, replace the cylinder, and the pistons and piston rings as a set.

c. Measure piston skirt diameter "P" with the micrometer.

@ 4 mm (0.16 in) from the bottom edge of the piston b. If out of specification, replace the cylinder, and the pistons and piston rings as a set.

c. Measure piston skirt diameter "P" with the micrometer.

@ 4 mm (0.16 in) from the bottom edge of the piston

Piston size "P"

d. If out of specification, replace the piston and piston rings as a set.

e. Calculate the piston-to-cylinder clearance with the following formula.

Piston-to-cylinder clearance = Cylinder bore "C" -Piston skirt diameter "P"

Piston-to-cylinder clearance 0.010 - 0.035 mm (0.0004 - 0.0014 in) <Limit>: 0.055 mm (0.0022 in)

f. If out of specification, replace the cylinder, and the piston and piston rings as a set.

Was this article helpful?

0 0

Post a comment