This circuit is OK.
Replace the starting circuit cut-off relay.
Connect the pocket tester (DC 20 V) to the meter assembly coupler (wire harness side) as shown.
►Turn the main switch to "ON". ► Measure the voltage (DC 12 V) of red/white at the meter assembly coupler (wire harness side).
Is the voltage within specification?
The wiring circuit from the main switch to the meter assembly coupler is faulty and must be repaired.
5. The oil level warning light fails to come on.
1. Oil level warning light (LEDs)
► Check the oil level warning light for continuity.
When the main switch is turn to "ON", the oil level warning light is come on. Are the oil level warning light OK?
Was this article helpful?