No

This circuit is OK.

Wiring circuit from the main switch to the tail/brake light coupler is faulty and must be repaired.

2. Voltage

Connect the pocket tester (DC 20 V) to the turn signal/position light coupler (wire harness side) as shown.

[A Left turn signal/position light [0 Right turn signal/position light

Left turn signal/position light Positive tester probe ^ blue ® Negative tester probe ^ black (2) Right turn signal/position light Positive tester probe ^ blue/red ( Negative tester probe ^ black (4)

Was this article helpful?

0 0

Post a comment