Place the motorcycle on a suitable stand so that the front wheel is elevated.

• steering head

Grasp the bottom of the front fork legs and gently rock the front fork. Binding/looseness ^ Adjust the steering head.

3. Remove:

• upper bracket

Refer to "HANDLEBAR" and "STEERING HEAD" in chapter 4.

Fz6 Steering Nut Wrench

4. Adjust: • steering head a. Remove the lock washer the upper ring nut (2, and the rubber washer (3.

b. Loosen the lower ring nut @ and then tighten it to specification with a steering nut wrench

Was this article helpful?

0 0

Post a comment